Metal detector electronics- The Advantages

Metal detector electronics are made to provide effective and quick results. The world is becoming increasingly advanced and the use of technology is rampant. In such situations, there is a need for machines and appliances to change according to the developing trend. As electronic products become more common in the markets, so do the goods that have previously been used without this new technology. The production of metal detector electronics is ample proof of the changing trend in lifestyle.

Metal Detector Electronics use of Very Low Frequency

Very Low Frequency (VLF) is a technology employed for the use of metal detector electronics. It is also known as Induction Balance. The VLF is considered one of the most famous methods used for metal detectors today. The VLF is made of two different coils. The transmitter coil is a coil of wire which is surrounded by an outer loop of coil. The electricity is sent along this wire thousands of times, first in one direction and then the other. The receiver coil is the second coil which is also made of wire surrounded by coil. This wire is responsible for acting like an antenna. It picks up and amplifies the frequencies coming from metal objects buried in the ground.

Metal detector electronics- The Advantages

Metal Detector Electronics use of Pulse Inductions

Another technology which is employed in the metal detectors electronics is the use of Pulse Indication (PI). The PI system is different from VLF because of its use of one coil working as both the transmitter and receiver of signals. Often enough, this single coil can also be two or three coils, all working at the same pace. The current pulses sent by these coils are strong and short. An ordinary metal detector running on PI can send around a 100 pulses for every second. However, this varies from the type and kind of metal detector electronics, depending on the brand of the machine.

Metal Detector Electronics use of Beat Frequency Oscillation

The easiest and most fundamental method of using metal detector electronics is known as the Beat-Frequency Oscillator (BFO). This kind of technology allows for two sets of coiled wires. The large coil is located in the search head of the machine while the smaller coil rests inside the control box of the detector. Both coils are connected to the oscillator which creates up to a 1000 beats of current every second. The pulse travels through the coil to generate waves. Thus, the metal detector electronics pick up on the waves and make an audible sound to detect the buried item.

Leave a Reply

Your email address will not be published. Required fields are marked *

Post Navigation

css.php

Social Widgets powered by AB-WebLog.com.